Problems booting up computer?

Hi,

I have a problem trying to boot my computer. It started intermittantly but now my system will not start.I turn the tower on but will not start.......Changed the pwr switch but did not start.Checked all connections to the mother board and hardware but nothing.The pwr supply has an on/off which seems to work---LED on mother board goes on and off so I know the pwr

supply is working and pwr seems to be working.I can not figure this one out?Can anyone suggest what may be the Gremlin please!

Thank You

Bob

This question was answered on June 24, 2004. Much of the information contained herein may have changed since posting.

There are a few things you can check in your computer to make sure it is properly cooled

Make sure you have atleast one fan in the front of your case blowing air to the back and atleast one fan in the back blowing the hot air out This will keep air circulation throughout your case cooling the case down considerably If you can put 2 in the front and 2 in the back.

If your case fans are fine, second thing to do is make sure you do not have your computer next to something hot, such as your monitor, or next to a heater

If your case is not near any source of heat, next and last thing to check would be your CPU fan and heatsink First make sure your fan is working and is blowing towards the heatsink If that is fine make sure your heatsink is tightly secure, if it is tightly secure remove the heatsink and check if there is a substance between the heatsink and CPU if there is not, that is the problem why your computer is restarting The CPU is overheating If there is no substance you can buy something called silicone which is a white substance, and in my opinion is not that great An alternative is something called Artic Silver, you can buy this at many online retailers including www.newegg.com and/or www.coolerguys.com When you do get the substance in put a think layer on the CPU core, once you have done that tighly secure your heatsink/fan back on to the CPU And the CPU should/will not overheat any more.

Regards,

Dimitrios Theodorou

About the author

Posted by Dimitrios of Katharine Gibbs School - New York on June 24, 2004

Need Help with this Issue?

We help people with technology! It's what we do.
Contact or Schedule an Appointment with a location for help!