What is Pre-n and Draft-n?

I am in the market for a wireless router and see new terms like MIMO, Pre-n and draft-n. What do they mean and do I need any of them?

- Josh

This question was answered on August 10, 2006. Much of the information contained herein may have changed since posting.

---

In the world of wireless, the push is always to improve speed and performance Anyone that’s worked with wireless home networking technology knows all of the pitfalls of getting good range and performance from the connections.

The best performing current “standard” is known as 802.11g, which is supported by every manufacturer of new laptops and networking equipment.

The “g” standard provides much higher theoretical speeds than the previous “b” standard, but the range issue is pretty much the same.

That’s where these new terms come into play; improving the signal strength and range

MIMO stands for Multiple Input Multiple Output and generally means that the wireless access point has more than one antenna By sending information out over two or more antennas, theoretically the multiple radio signals reflect off objects creating multiple paths that will carry more information These multiple signals are recombined on the receiving side by the MIMO algorithms, potentially improving performance in hard to reach areas.

But MIMO does not necessarily improve range since the primary objective is to increase the saturation of the signal.

Both pre-n and draft-n are part of the alphabet soup of the 802.11 standard

The IEEE (Institute of Electrical and Electronics Engineers) is working on the next “standard” which will be 802.11n, but it has not been finalized as of yet.

When you see a “pre-n” product, it is one designed based on the future “n”

standard, but is not a standard It will generally only work with that companies devices, which means if you buy brand XYZ’s wireless router, you will also need to buy brand XYZ’s wireless networking adapters for all of your computers.

Interoperability between pre-n and non pre-n devices can be difficult and even if you get it to work, you don’t gain anything unless everything is pre-n.

Draft-n refers to the current draft of the “n” standard, but is still a pre-standard release of product In other words, you would still be buying technology that has been released prior to the finalizing of the standard.

There is no guarantee that the future standard for “n” will work with anything that you buy today that is either pre-n or draft-n.

In our tests of these kinds of devices, we did experience significant improvement in distance, but getting signal to close-by but hard to reach “compartments” of a building was not any better.

So, if you don’t have many obstructions between your computer and your wireless router, you can extend the range with pre-n or draft-n as long as you use the same brand equipment at both ends.

If you are close by, but are having a problem with signal strength, try a unit with multiple antennas, but remember all of these devices are using an unregulated radio frequency which can be impacted by cordless phones, microwave ovens, baby monitors, alarm systems, etc.

There is no “one-size-fits-all” solution for residential wireless, so you may have to experiment in your environment to see what works best for you.

About the author

Posted by Ken Colburn of Data Doctors on August 10, 2006

Need Help with this Issue?

We help people with technology! It's what we do.
Contact or Schedule an Appointment with a location for help!